Convesa Twin Wall Flue 150mm Firestop Plate Expand

Convesa Twin Wall Flue 150mm Firestop Plate

610-150-070

New

Convesa Twin Wall Flue 150mm Firestop Plate

More details

11 Items

€ 56.75

tax incl.

  • Convesa Twin Wall Flue 150mm Firestop Plate
  • A Firestop Plate Is Used To Allow The Chimney To Pass Between Floors, e.g. When You Need The Chimney To Go Through The Ceiling On The Ground Floor Through To The First Floor. The Steel Plate Is Designed To Provide The Appropriate Distance Between The Flue & The Adjacent Flamable Materials, According To Both Fire And Building Regulations. It Is Attached To The Underside Of The Ceiling
  • If You Are Going Through A Second Ceiling Then You Should Use A Second Firestop Plate On The Floor And Again On The First Floor Ceiling
  • You Should Use A Ventilated Firestop When The Installed Appliance Will Burn Solid Fuels, For Example Wood, Coal, etc.
  • A Non-Ventilated Firestop Plate Can Be Used On Installations Burning Gas Or Oil
  • Outer Skin; 304 Grade Stainless Steel, 0.4mm Thick
  • Inner Skin; 316 Grade Stainless Steel, 0.4mm Thick
  • Insulation; Compressed Rockwool, Density Of 128kg Per Cubic Metre
  • All Parts Are Fully Welded
  • Distance To Combustibles; 60mm
  • KC Is HETAS Approved & Is CE Marked
  • KC Twin Wall Insulated Chimney Parts Are Secured Together By Using A Locking Band
  • Make Sure That You Keep A Distance Of 60mm From The Outside Of The Flue To Any Combustible Material (Wood, Plaster Board)

No customer reviews for the moment.

Write a review

Accept

This webite use cookies. By continuing we assume you are ok with that.